The Maverick Grinding System is assembled by Poly-FilTM and is located within Polycoat’s Arlington, TX production facility. It was designed to be paired with the Maverick AM Granulated Pumping System, however the bulk bags of regrind it makes can be used with other fill machines utilizing bulk bags. Design improvements include a belt drive system that is quiet and helps protect the torque hub from damage, increased regrind output and an auger system for filling bulk bags.
The Maverick Grinding System was designed with input from tire-fill dealers and their tire-fill technicians. Major changes incorporated include decoupling the grinding of the reclaimed tire fill process from the mixing and pumping system, bulk bag conditioning paddles, increased pumping rate, system pressure display, A-Side recirculation valve and exclusive “Quick Clean” lower hopper.
The HULK II OEM Granulated Pumping System is available exclusively through Poly-FilTM and Polycoat Products. It was developed for the demanding production required by the OEM Tire Mounting and Filling Facilities. The HULK II is available in 460 VAC 60 Hz 3 Phase power and 380 VAC 50 Hz 3 Phase power configurations. The base model is will process oil based tire-fills with rubber crumb OR tire-fill Regrind. Upgrade model available for running both Water Based and Oil Based Fills. The HULK II utilizes a HMI touchscreen to facilitate machine operation and provide the operator with real-time display of key process parameters. 5 mix ratios are available with a maximum fill rate of 40 LBS/Min.