Infrastructure

Polyeuro^® 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® 5502-18PW is ANSI/NSF 61 approved for direct contact with potable water. It is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component, spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyeuro^® 1050H offers a tack-free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.

Polyeuro^® 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® 5602 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component, spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (29°C).

Polyeuro^® 5901 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® MPL-11 is a two component, 1:1, 100% solids, fast set, liquid applied, modified-polyurea-liner system for metal, concrete, fiberglass and wood surfaces.

Polyeuro^® MPL-501 is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea-liner system for metal, concrete, fiberglass and wood surfaces.

Polyeuro^® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyeuro^® 1050H offers a tack-free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.

Polyeuro^® 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

PipePro Ultra is a direct‐to‐metal, quick‐set, two component, 100% solids polyurethane designed to protect pipelines from corrosion and abrasion. It is especially formulated for Water Transmission Piping and Piping ID/OD applications.

Polyeuro^® 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® MPL-11 is a two component, 1:1, 100% solids, fast set, liquid applied, modified-polyurea-liner system for metal, concrete, fiberglass and wood surfaces.

Polyeuro^® MPL-501 is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea-liner system for metal, concrete, fiberglass and wood surfaces.

Polyeuro^® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyeuro^® 1050H offers a tack-free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.

Polyeuro^® 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® 5502-18PW is ANSI/NSF 61 approved for direct contact with potable water. It is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component, spray polyurea that can be applied to suitably prepared concrete and metal surfaces.

Polyeuro^® 5602 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component, spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (29°C).

Polyeuro^® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyeuro^® 1050H offers a tack-free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.

Polyeuro^® 5901 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces.