Page 18 - Polycoat 10.2 Technical Data Sheet Polycaulk 82

TECHNICAL DATA SHEET
®
POLYEURO MPL 11 FR
Fire Retardant
Two Component Modified Polyurea Protective Coating

Product Description
Polyeuro MPL 11 FR is a Class 1 fire-rated, three component, Technical Data (Based on Draw Down Film)
®
1:1, 100% solids, fast set, liquid applied, modified polyurea Mix Ratio by Volume 1A : 1B (with B & C)
liner system for metal, concrete, fiberglass and wood surfaces. Pot Life @ 75ºF (24ºC), 50% R.H. 3 - 6 seconds
Features Tack-Free Time (150 mils thick) 10 -30 seconds
Recoat Time 0 - 12 hours
• Abrasion and Impact Resistant
• Chemical Resistant Viscosity at 150-160°F (66.5-71°C)
Side-A
• High Build Side-B 150 ± 20 cps
200 ± 20 cps
• Low Temperature Flexibility Density (Side-A & Side-B Combined) 13.03 lbs/gal
• Meets ASTM E84 Class 1 Fire Test Criteria
• Quick Drying Flash Point > 200°F (93.3°C)
• Seamless Hardness, ASTM D2240 50 ± 5 Shore D
• Tough and Elastomeric Tensile Strength, ASTM D412* 1600 ± 200 psi
11.03 ± 1.37 MPa
Typical Uses Elongation, ASTM D412* 45 ± 20%
• Boat Linings Tear Resistance, ASTM D412* 350 ± 50 pli
• Cargo Holds 61.4 ± 8.8 kNm
• Cargo Liners Service Temperature -20°F to 250°F
• Chemical Process Facilities -29°C to 121°C
• Containment Areas *These physical properties from sample sprayed with Graco Foam Cat 200 @ 2000 psi minimum,
• Encapsulation of Fiberglass Bodies and Polystyrene with Gusmer GX7-400 mechanical purge gun @ 150-160°F (65°C to 71°C). Different machine
and parameter will change these properties. User should perform their own independent testing
Foams as properties are approximate.
• Horse Trailers
• Industrial and Manufacturing Facilities polyurea coating for a colorfast finish.
• Industrial Floorings Mixing
®
• Mining Process Systems and Facilities Polyeuro MPL 11 FR may not be diluted under any circum-
®
• Power Production Plants stances. Thoroughly mix Polyeuro MPL 11 FR Side-A and
• Structural Steel Corrosion Protection Side-B with air driven power equipment.
• Truck Bed Surfaces Mix Side-C into Side-B container until a homogeneous mix-
• Utility Vehicles ture and color is obtained. For a 10 gallon kit, mix for 5 min-
utes. For a 100 gallon kit, mix for 20 minutes.
• Walkways
• Waterproof Decking Coverage
Polyeuro MPL 11 FR may be applied at any rate to achieve
®
desired thickness. Theoretical coverage for 1 mil (0.254
Packaging microns) thickness is one gallon per 1600 sqft (3.78 liters per
149 sqm).
10-gallon kit One 5 gallon (18.9 liter) pail of Side-A, Estimating Formula: (1600 sqft per gal /Dry Mil Thickness) x
one 5 gallon pail (net fill 4.5 gal, 17 Solids Content = Application Rate per gallon.
liters) of Side-B and one 1 gallon can
(net fil 0.5 gal, 1.89 liter) of Side-C Surface Preparation
In general, coating performance and adhesion are directly
proportional to surface preparation. Most failures in the
100-gallon kit One 50 gallon (18.9 liter) drum of performance of surface coatings can be attributed to poor
Side-A, one 50 gallon drum (net fil surface preparation. Polyurea coatings rely on the structural
45 gal, 174 liter) of Side-B and one 5 strength of the substrate to which they are applied. All sur-
gallon (18.9 liter) pail of Side-C faces must be free of dust, dirt, oil, grease, rust, corrosion
and other contaminants. When coating substrates previously
Colors used, it is important to consider the possibility of substrate
Clear/Neutral. Custom colors are available upon request. Color absorption, which may affect the adhesion of the coating
Packs, when used, must be added to Side-B. system, regardless of the surface preparation. Polycoat
recognizes the potential for unique substrates from one project
Due to its aromatic composition, Polyeuro MPL 11 FR will tend to another. The following information is for general reference,
®
to yellow or darken in color and will become flat after exposure and for project-specific questions, contact Polycoat.
to UV light. Polyeuro MPL 11 FR may be topcoated within
®
twelve hours of application with an aliphatic polyurethane/ NEW AND OLD CONCRETE

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363
wpsales@polycoatusa.com | www.polycoatusa.com