Page 22 - Polycoat 10.2 Technical Data Sheet Polycaulk 82

Vacuum to remove dust, etc., prior to application of primer.
Use fiberglass (C-Veil Glass) or a geotextile cloth to bridge
cracks over the primed surface.
Primer is always recommended to take care of voids, pot
holes or bug holes etc.
Application
Both Side-A and Side-B materials should be preconditioned
at 75-80°F (24-27°C) before application.
Polyeuro MPL 80 should be applied using a plural compo-
®
nent, heated, high pressure 1:1 spray mixing equipment like
Graco’s Hydra Cat, Gusmer or other equivalent machine may
be used.
Both Side-A and Side-B materials should be sprayed at
temperatures above 150°F (65°C). Adequate pressure and
tem- perature should be maintained at all times.
Storage
Polyeuro MPL 80 has a shelf life of one (1) year from date
®
of manufacture in original, factory-sealed containers when
stored indoors at a temperature between 60-95°F (15-35°C).
Side-A and Side-B drums are recommended to be stored
above 60°F (15°C). Avoid freezing temperatures.
Store drums on wooden pallets to avoid direct contact with
the ground. If stored for a long period of time, rotate Side-A
and Side-B drums regularly.
Limitations
Due to its aromatic composition, Polyeuro MPL 80 will tend to
®
yellow or darken in color after exposure to UV light. Polyeuro
MPL 80 may be topcoated with an aliphatic polyurethane
coating, such as Polycoat’s Polyglaze 100, AL-50, or Staingard
®
®
7000 polyaspartic, for a color-fast glossy finish.
Do not open until ready to use.
Both Side-A and Side-B containers bust be fitted with a
desiccant device during use.
Warning
This product contains Isocyanates and Curative Material.

Limited Warranty: Please read all information in the General Guidelines, Technical Data Sheets, Guide Specifications and Safety Data Sheets (SDS) before applying material. These
products are for professional use only and preferably applied by professionals who have prior experience with the Polycoat Products materials or have undergone training in application
of Polycoat Products materials. Published technical data and instructions are subject to change without notice. Contact your local Polycoat Products representative or visit our website for
current technical data, instructions, and project specific recommendations.
Polycoat Products warrants its products to be free of manufacturing defects and that they will meet Polycoat Products’ current published physical properties. Seller’s and manufacturer’s
sole responsibility shall be to replace that portion of the product which proves to be defective. There are no other warranties by Polycoat Products of any nature whatsoever expressed or
implied, including any warranty of merchantability or fitness for a particular purpose in connection with this product. Polycoat Products shall not be liable for damages of any sort, including
remote or consequential damages resulting from any claimed breach of any warranty whether expressed or implied. Polycoat Products shall not be responsible for use of this product in a
manner to infringe on any patent held by others. In addition, no warranty or guarantee is being issued with respect to appearance, color, fading, chalking, staining, shrinkage, peeling, normal
wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and/or physical movement of the substrate or
structural defects are also excluded from the limited warranty. Polycoat Products reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs
by owner, general contractor, or applicator.
Disclaimer: All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and
completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user’s responsibility to satisfy himself, by his own information and
test, to determine suitability of the product for his own intended use, application and job situation and user assumes all risk and liability resulting from his use of the product. We do not suggest
or guarantee that any hazard listed herein are the only ones which may exist. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly
or indirectly resulting from use of, or inability to use, the product. Recommendations or statements, whether in writing or oral, other than those contained herein shall not be binding upon the
manufacturer, unless in writing and signed by a corporate officer of the manufacturer. Technical and application information is provided for the purpose of establishing a general profile of the
material and proper application procedures. Test performance results were obtained in a controlled environment and Polycoat Products makes no claim that these tests or any other tests
accurately represent all environments. Polycoat Products is not responsible for typographical errors. © 2020 Polycoat Products. All rights reserved. Revision 20201125.AG

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363
wpsales@polycoatusa.com | www.polycoatusa.com