Page 163 - tmp

P. 163

CHEMICAL RESISTANCE CHART FOR POLYCOAT-STAINGARD 7000 & 7072

he following chemical resistance data were obtained from a 70-75 mils film of Polycoat-Staingard 7000 / 7072 immersed in each
chemical listed below at 70-75ºF for a period of 7 days. Like other industrial maintenance coatings, Polycoat-Staingard 7000 /
7072 has chemical and temperature limitations. Please read the disclaimer below. For chemicals other than those listed below, proper
testing must be completed prior to application of the coating system. It is advisable to consult your local Polycoat representative.

CHEMICAL SOLVENTS
Xylene 4 Motor Oil 1
Toluene 4 Gasoline (unleaded) 1
Isoproply Alcohol 3 Brake Fluid 4
Methyl Ethyl Ketone 4 Transmission Fluid 1
Skydrol 4

ACIDS and BASES
Hydrochloric Acid 10% 1 Potassium Hydroxide 10% 2
Hydrochloric Acid 5% 1 Potassium Hydroxide 20% 2
Propylene Carbonate 3 Sodium Hydroxide 10% 2
Acetic Acid, 10% 1 Sodium Hydroxide 20% 2
Phosphoric Acid, 10% 1 10% Sugar/Water 1
Sulphuric Acid 60% 4 Drinking Water 1
Sulphuric Acid 10% 1 De-Ionized Water 1
Sulphuric Acid 5% 1

CHART KEYS:
1: no visible damage
2: little visible damage
3: some effect swelling, discoloration, cracking
4: not recommended
5: satisfactory for splash, spillage and secondary containment (72-96 hours)

DISCLAIMER: All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable and correct, but

accuracy and completeness of said test s are not guaranteed and are not to be construed as a warranty,either expressed or implied. This information
relates to the specific material designated and may not be valid for such material used in combination with any other material or in any process.
It is the users responsibility to satisfy himself, by his own information and test, to determine suitability of the product for his own intended use
and user assumes all risk and liability resulting from his use of the product. Neither seller nor manufacturer shall be liable to the buyer or any third
person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or
statements, whether in writing or oral, other than those contained herein shall not be binding upon the manufacturer, unless in writing and
signed by a corporate officer of the manufacturer.
Test performance result s were obtained in a controlled environment and POLYCOAT PRODUCTS makes no claim that these tests or any other
tests, accurately represent all environments. Application, environmental and design factors can vary significantly, due care should be
exercised in the selection and use of the coating.
PUBLISHED TECHNICAL DATA AND INSTRUCTIONS ARE SUBJECT T O CHANGE WITHOUT NOTICE. CONTACT YOUR LOCAL

POLYCOAT PRODUCTS REPRESENTATIVE FOR CURRENT TECHNICAL DATA AND INSTRUCTIONS.

POLYCOAT PRODUCTS
A Division of American Polymers Corp.
14722 Spring Avenue, Santa Fe Springs, CA 90670-5108 USA POLYCOAT-STAINGARD 7000 & 7072
TEL (562) 802-8834 INTERNET www.polycoatusa.com
FAX (562) 921-7363 E-MAIL sales@polycoatusa.com CHEMICAL RESISTANT

158 159 160 161 162 163 164 165