Page 161 - tmp

CHEMICAL RESISTANCE TESTING CHART

Polyeuro MP-11
®

The following chemical resistance spot testing data were ACIDS AND BASES, continued
obtained from a 70-75 mils film of Polyeuro MPL 11 in each Ammonium Hydroxide 10% ....................................................1
®
chemical listed below at 70-75°F (21.1-23.4°C) for a period Ammonium Hydroxide 20% ....................................................1
of 72-96 hours. Like other industrial maintenance coatings, Sodium Hydroxide 50% ...........................................................2
Polyeuro MPL 11 has chemical and temperature limitations. Salt Water (30%) .......................................................................1
®
Please read the disclaimer below. For chemicals other than Drinking Water ..........................................................................1
those listed below, proper testing must be completed prior De-Ionized Water........................................................................1
to application of the coating system. It is advisable to consult Sulfuric Acid 60% ......................................................................4
your local Polycoat Products representative. Sulfuric Acid 30%.......................................................................5
Sulfuric Acid 10%........................................................................1
CHEMICAL SOLVENTS: Sulfuric Acid 5%........................................................................1
Xylene .......................................................................................4 Potassium Hydroxide 10% .......................................................1
Toluene .....................................................................................4 Potassium Hydroxide 20% ..........................................2
Acetone..................................................................................3/5 Sodium Hydroxide 10% ...........................................................1
2 Methyl Butane........................................................................1 Sodium Hydroxide 20% ...........................................................2
MTBE ...........................................................................3/5 10-30% Sugar/Water .........................................................1
HEXANE.................................................................................3/5 Acetic Acid 2% ..........................................................................1
Motor Oil ..................................................................................2 Acetic Acid 5% ..........................................................................1
Gasoline (unleaded) .................................................................1 Acetic Acid 10% ........................................................................1
Diesel .........................................................................................1 Acetic Acid 50% ........................................................................4
Brake Fluid.................................................................................2 Formic Acid 2%..........................................................................1
Hydraulic Oil .............................................................................1 Formic Acid 5%..........................................................................1
Methanol ..................................................................................4 Formic Acid 10%........................................................................2

ACIDS AND BASES:
Sewage .....................................................................................1 CHART KEYS:
Hydrogen Sulphide gas (H S gas) ..............................1 1: No visible damage
2
Hydrocholric Acid 35% .............................................................4 2: Little visible damage
Hydrochloric Acid 10% ................................................1 3: Some effect swelling, discoloration, cracking
Hydrochloric Acid 5% ...............................................................1 4: Not recommended
Propylene Carbonate................................................................3 5: Satisfactory for splash, spillage and secondary containment
Lactic Acid, 45% .......................................................................2 (72-96 hours)
Phosphoric Acid, 10% ..............................................................1

Limited Warranty: Please read all information in the General Guidelines, Technical Data Sheets, Guide Specifications and Safety Data Sheets (SDS) before applying material. These
products are for professional use only and preferably applied by professionals who have prior experience with the Polycoat Products materials or have undergone training in application
of Polycoat Products materials. Published technical data and instructions are subject to change without notice. Contact your local Polycoat Products representative or visit our website for
current technical data, instructions, and project specific recommendations.
Polycoat Products warrants its products to be free of manufacturing defects and that they will meet Polycoat Products’ current published physical properties. Seller’s and manufacturer’s
sole responsibility shall be to replace that portion of the product which proves to be defective. There are no other warranties by Polycoat Products of any nature whatsoever expressed or
implied, including any warranty of merchantability or fitness for a particular purpose in connection with this product. Polycoat Products shall not be liable for damages of any sort, including
remote or consequential damages resulting from any claimed breach of any warranty whether expressed or implied. Polycoat Products shall not be responsible for use of this product in a
manner to infringe on any patent held by others. In addition, no warranty or guarantee is being issued with respect to appearance, color, fading, chalking, staining, shrinkage, peeling, normal
wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and/or physical movement of the substrate or
structural defects are also excluded from the limited warranty. Polycoat Products reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs
by owner, general contractor, or applicator.
Disclaimer: All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and
completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user’s responsibility to satisfy himself, by his own information and
test, to determine suitability of the product for his own intended use, application and job situation and user assumes all risk and liability resulting from his use of the product. We do not suggest
or guarantee that any hazard listed herein are the only ones which may exist. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly
or indirectly resulting from use of, or inability to use, the product. Recommendations or statements, whether in writing or oral, other than those contained herein shall not be binding upon the
manufacturer, unless in writing and signed by a corporate officer of the manufacturer. Technical and application information is provided for the purpose of establishing a general profile of the
material and proper application procedures. Test performance results were obtained in a controlled environment and Polycoat Products makes no claim that these tests or any other tests
accurately represent all environments. Polycoat Products is not responsible for typographical errors. © 2022 Polycoat Products. All rights reserved. Revision 20220411.AG

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363
info@polycoatusa.com | www.polycoatusa.com