Page 159 - tmp

CHEMICAL RESISTANCE CHART FOR POLYEURO 8245
®
Specifically designed to have better Acid and Bases Chemical Resistance Property.

®
The following chemical resistance data were obtained from a 70-75 mils film of POLYEURO 8245 immersed in each chemical listed below
at 70-75 degF for a period of 30 days. Like other industrial maintenance coatings, POLYEURO 8245 has chemical and temperature
®
limitations. Please read the disclaimer below. For chemicals other than those listed below, proper testing must be completed prior to
application of the coating system. It is advisable to consult your local Polycoat representative.
CHEMICAL SOLVENTS CHEMICAL SOLVENTS
Xylene 4 Motor Oil 2
Toluene 4 Gasoline (unleaded) 5
Acetone 4 Diesel 1
2 Methyl Butane 4 Brake Fluid 2
MTBE 4 Hydraulic Oil 1
HEXANE 4 Methanol 4

ACIDS and BASES ACIDS and BASES
Potassium Hydroxide 10% 1 Sewage 1
Potassium Hydroxide 20% 1 Hydrogen Sulphide gas (H S gas) 1
Sodium Hydroxide 10% 1 Hydrocholric Acid 35% 2 4
Sodium Hydroxide 20% 1 Hydrochloric Acid 10% 1
10% Sugar/Water 1 Hydrochloric Acid 5% 1
Propylene Carbonate 3 Acetic Acid, 50% 5
Ammonium Hydroxide 10% 1 Phosphoric Acid, 10% 1
Ammonium Hydroxide 20% 1 Sulphuric Acid 97% 4
Sodium Hydroxide 50% 1 Sulphuric Acid 50% 1
Salt Water (10%) 1 Sulphuric Acid 30% 1
Drinking Water 1 Sulphuric Acid 10% 1
De-Ionized Water 1 Sulphuric Acid 5% 1
Glacial Acetic Acid 4
Nitric Acid 25% 5
Nitric Acid 50% 4
Nitric Acid 70% 4
Hydro Flouric Acid 10% 5
CHART KEYS: Hydro Flouric Acid 30% 4
1: no visible damage Hydro Flouric Acid 50% 4
2: little visible damage
3: some effect swelling, discoloration, cracking
4: not recommended
5: satisfactory for splash, spillage and secondary containment (72-96 hours)

DISCLAIMER: All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable and correct, but
accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty , either expressed or imp lied. This
information relates to the specific material designated and may not be valid for such material used in combination with any oth er material or in any
process. It is the users responsibility to satisfy himself, by his own information and test, to determine suitability of the product for his own intended
use and user assumes all risk and liability resulting from his use of the product. Neither seller nor manufacturer shall be li able to the buyer or any
third person for any injury , loss or damage directly or indirectly resulting from use of, or inability to use, the product. Re commendations or
statements, whether in writing or oral, other than those contained herein shall not be binding upon the manufacturer, unless in writing and signed by
a corporate officer of the manufacturer.
Test performance results were obtained in a controlled environment and POLYCOAT PRODUCTS makes no claim that these tests or any other tests, accurately
represent all environments. Application, environmental and design factors can vary significantly, due care should be exercised in the selection and use of the
coating.
PUBLISHED TECHNICAL DATA AND INSTRUCTIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT YOUR LOCAL POLYCOAT PRODUCTS
REPRESENTATIVE FOR CURRENT TECHNICAL DATA AND INSTRUCTIONS.

POLYCOAT PRODUCTS POLYEURO 8245
®
A Division of American Polymers Corp.
14722 Spring Avenue, Santa Fe Springs, CA 90670-5108 USA CHEMICAL RESISTANT

TEL (562) 802-8834 INTERNET www.polycoatusa.com

FAX (562) 921-7363 E-MAIL sales@polycoatusa.com

14722 Spring Avenue  Santa Fe Springs, CA 90670-5108 USA Tel: 562/802-8834  Fax: 562/921-7363  www.polycoatusa.com  Copyright ® May 2011 Polycoat Products  Page 1 of 1