Page 160 - tmp

POLYCOAT POLYEURO LP-12
®
PRODUCTS Chemical Resistance Spot Testing

A Division of American Polymers Corp.

The following chemical resistance spot testing data were ACIDS AND BASES, cont’d.:
obtained from a 70-75 mils film of Polyeuro LP-12 in each Linseed Fatty Acid .......................................................1
®
chemical listed below at 70-75°F for a period of 72-96 hours. Boracic Acid, 4% ..........................................................2
Like other industrial maintenance coatings, Polyeuro ® LP- Tannic Acid, 20% .........................................................1
12 has chemical and temperature limitations. Please read Caustic Soda Lye, 10% ..............................................1
the disclaimer below. For chemicals other than those listed Caustic Soda Lye, 40% ..............................................2
below, proper testing must be completed prior to applica- Caustic Soda Lye, 50% ..............................................2
tion of the coating system. It is advisable to consult your Potash Lye, 20% .........................................................1
local Polycoat Products representative. Chlorine Lye, 3% .........................................................2
Sugar Solution, 30% ...................................................1
CHEMICAL SOLVENTS: Saline Solution, 30% ..................................................1
Acetone........................................................................4 Ammonia, 5% ..............................................................1
Hexane ........................................................................1 Soda Solution, 20% ....................................................2
Motor Oil ......................................................................2 Citric Acid, 10%............................................................1
Gasoline (unleaded) ....................................................1
Hydraulic Oil ................................................................2 CHART KEYS:
Methanol ......................................................................4 1: No visible damage
Xylol..............................................................................4 2: Little visible damage
Methylene Chloride .....................................................4 3: Some effect swelling, discoloration, cracking
4: Not recommended
5: Satisfactory for splash, spillage and secondary contain-
ACIDS AND BASES: ment (72-96 hours)
Sulphuric Acid 10% .....................................................1
Sulphuric Acid 25% .....................................................2
Sulphuric Acid 50% .....................................................4
Sulphuric Acid 60% .....................................................4
Acetic Acid 2% .............................................................1
Acetic Acid 5% .............................................................3/5
Acetic Acid 10% ...........................................................3/5
Acetic Acid 50% ...........................................................4
Formic Acid 2%............................................................1
Formic Acid 5%............................................................1
Formic Acid 10% .........................................................4
Phosphoric Acid, 25% .................................................1
Phosphoric Acid, 50% .................................................2
Lactic Acid, 45% ..........................................................2
Hydrocholric Acid 37% ................................................4
Nitric Acid 10% ............................................................2

DISCLAIMER: All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable and correct, but accuracy and
completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. This information relates to the specific
material designated and may not be valid for such material used in combination with any other material or in any process. It is the users responsibility to satisfy
himself, by his own information and test, to determine suitability of the product for his own intended use and user assumes all risk and liability resulting from his
use of the product. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from
use of, or inability to use, the product. Recommendations or statements, whether in writing or oral, other than those contained herein shall not be binding upon the
manufacturer, unless in writing and signed by a corporate officer of the manufacturer.
Test performance results were obtained in a controlled environment and POLYCOAT PRODUCTS makes no claim that these tests or any other tests, accurately
represent all environments. Application, environmental and design factors can vary significantly, due care should be exercised in the selection and use of the
coating.

PUBLISHED TECHNICAL DATA AND INSTRUCTIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT YOUR LOCAL POLYCOAT PRODUCTS
REPRESENTATIVE FOR CURRENT TECHNICAL DATA AND INSTRUCTIONS.
14722 Spring Avenue  Santa Fe Springs, CA 90670-5108 USA Tel: 562/802-8834  Fax: 562/921-7363  www.polycoatusa.com  Copyright ® OCT 2011 Polycoat Products  Page 1 of 1