Page 124 - tmp

Polyprime EBF-LV.
®
Mixing
Poly-Caulk PX27GG may not be diluted under any
®
circumstance.
Pre-mix Poly-Caulk PX27GG Side-B material before combining
®
with Side-A. Side-A material requires no mixing. Add Side-A
to Side-B while mixing, using a mechanical mixer at low speed.
Mix until a homogeneous mixture and color is attained (at
least 5 minutes).
Use care to scrape the sides of the container to ensure that
no unmixed material remains.
Use caution not to whip air into the material as this may result
in pinhole blisters and/or shortened pot life.
Do not mix in an up and down motion.
Application
Apply using a caulking gun, hand pressure-type or pour from
container.
This material can be applied at ambient temperatures from
40°F (4.4°C) to as high as 135°F (57°C).
The product needs to be conditioned at 75-80°F(24-27°C) prior
to use.
Finishing
After applying Poly-Caulk PX27GG, wait 36-48 hours,
®
depending on temperature and humidity before opening to
traffic.
Cleanup
Cured product may be disposed of without restriction. Mix
excess Side-A with Side-B material and allow to cure. Check
local, state and federal laws before disposing of material.
Storage
Poly-Caulk PX27GG should be stored at room temperature,
®
60-95°F (15-35°C).
Poly-Caulk PX27GG has a shelf life of 1 year from date of
®
manufacture in original, factory-sealed containers when stored
indoors at a temperature between 60-95°F (15-35°C).
Limitations
Discoloration will occur if exposed to UV, however no change
will occur in the physical properties.
Warning
This product contains Isocyanates and Curatives.

Limited Warranty: Please read all information in the General Guidelines, Technical Data Sheets, Guide Specifications and Safety Data Sheets (SDS) before applying material. These products are for professional use only
and preferably applied by professionals who have prior experience with the Polycoat Products materials or have undergone training in application of Polycoat Products materials. Published technical data and instructions are
subject to change without notice. Contact your local Polycoat Products representative or visit our website for current technical data, instructions, and project specific recommendations.
Polycoat Products warrants its products to be free of manufacturing defects and that they will meet Polycoat Products’ current published physical properties. Seller’s and manufacturer’s sole responsibility shall be to
replace that portion of the product which proves to be defective. There are no other warranties by Polycoat Products of any nature whatsoever expressed or implied, including any warranty of merchantability or fitness for
a particular purpose in connection with this product. Polycoat Products shall not be liable for damages of any sort, including remote or consequential damages resulting from any claimed breach of any warranty whether
expressed or implied. Polycoat Products shall not be responsible for use of this product in a manner to infringe on any patent held by others. In addition, no warranty or guarantee is being issued with respect to appearance,
color, fading, chalking, staining, shrinkage, peeling, normal wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and/or physical movement
of the substrate or structural defects are also excluded from the limited warranty. Polycoat Products reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs by owner,
general contractor, or applicator.
Disclaimer: All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and completeness of said tests are not
guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user’s responsibility to satisfy himself, by his own information and test, to determine suitability of the product for his own intended use,
application and job situation and user assumes all risk and liability resulting from his use of the product. We do not suggest or guarantee that any hazard listed herein are the only ones which may exist. Neither seller nor manufacturer
shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements, whether in writing or oral, other than those
contained herein shall not be binding upon the manufacturer, unless in writing and signed by a corporate officer of the manufacturer. Technical and application information is provided for the purpose of establishing a general profile
of the material and proper application procedures. Test performance results were obtained in a controlled environment and Polycoat Products makes no claim that these tests or any other tests accurately represent all environments.
Polycoat Products is not responsible for typographical errors. © 2023 Polycoat Products. All rights reserved. Revision 20230807.JC

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 7.7
wpsales@polycoatusa.com | www.polycoatusa.com