Page 120 - tmp

Application that discoloration from exposure to ultraviolet light can occur,
Performance and adhesion are directly related to preparation. but physical properties will remain unaffected
Prior to installation the joint sidewalls must be freshly abraded Warning
with a clean-out saw equipment with a diamond blade and This product contains Isocyanates and Curatives.
then vacuumed clean to exposing clean, dust free edges to
maximize adhesion. For rough or broom finished concrete it is
recommended to avoid overfilling the joint as shaving could be
difficult. For smooth non-densified concrete, a stain prevention
product / method should be considered to prevent etching.
Material Installation Temperature: 70°F or greater (21°C)
Exposure Temperature: -40°F to 200°F (-40°C to 93.3°C)
Cleanup
Cured product may be disposed of without restriction. Mix
excess Side-A with Side-B material and allow to cure. Check
local, state and federal laws before disposing of material.
Storage
Poly-Caulk JS-45 should be stored at room temperature,
®
60-95°F (15-35°C).
®
Poly-Caulk JS-45 has a shelf life of one (1) year from date
of manufacture in original, factory-sealed containers when
stored indoors at a temperature between 60-95°F (15-35°C).
Safety
For in-depth information on product safety and precautions,
please review the product SDS sheets. Prior to using the
product, ensure that you have the proper personal protection
equipment (PPE) available. This includes but is not limited to
the following items:
• Safety Glasses With A Splash Shield
• Minimum Organic Cartridge Respirator
• Rubber or Nitrile Gloves
• Disposable or Reusable Long Sleeve Overalls
• Rubber or Leather Boots
Always Be Sure to Follow The Precautions Listed Below
When Using the Material:
• Do Not Use Near High Heat or Open Flame
• Do Not Take Internally
• Keep Out of Reach of Children
Limitations
®
Poly-Caulk JS-45 is not recommended for use under non-
resilient or polymer flooring systems. Do not use on slopes
greater than 15%. With the exception of small random cracks,
backer rod (open cell) should be used in all joints. Be aware

Limited Warranty: Please read all information in the General Guidelines, Technical Data Sheets, Guide Specifications and Safety Data Sheets (SDS) before applying material. These products are for professional use only
and preferably applied by professionals who have prior experience with the Polycoat Products materials or have undergone training in application of Polycoat Products materials. Published technical data and instructions are
subject to change without notice. Contact your local Polycoat Products representative or visit our website for current technical data, instructions, and project specific recommendations.
Polycoat Products warrants its products to be free of manufacturing defects and that they will meet Polycoat Products’ current published physical properties. Seller’s and manufacturer’s sole responsibility shall be to
replace that portion of the product which proves to be defective. There are no other warranties by Polycoat Products of any nature whatsoever expressed or implied, including any warranty of merchantability or fitness for
a particular purpose in connection with this product. Polycoat Products shall not be liable for damages of any sort, including remote or consequential damages resulting from any claimed breach of any warranty whether
expressed or implied. Polycoat Products shall not be responsible for use of this product in a manner to infringe on any patent held by others. In addition, no warranty or guarantee is being issued with respect to appearance,
color, fading, chalking, staining, shrinkage, peeling, normal wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and/or physical movement
of the substrate or structural defects are also excluded from the limited warranty. Polycoat Products reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs by owner,
general contractor, or applicator.
Disclaimer: All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and completeness of said tests are not
guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user’s responsibility to satisfy himself, by his own information and test, to determine suitability of the product for his own intended use,
application and job situation and user assumes all risk and liability resulting from his use of the product. We do not suggest or guarantee that any hazard listed herein are the only ones which may exist. Neither seller nor manufacturer
shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements, whether in writing or oral, other than those
contained herein shall not be binding upon the manufacturer, unless in writing and signed by a corporate officer of the manufacturer. Technical and application information is provided for the purpose of establishing a general profile
of the material and proper application procedures. Test performance results were obtained in a controlled environment and Polycoat Products makes no claim that these tests or any other tests accurately represent all environments.
Polycoat Products is not responsible for typographical errors. © 2023 Polycoat Products. All rights reserved. Revision 20230807.JC

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 7.5
info@polycoatusa.com | www.polycoatusa.com