Page 55 - Polycoat 1.1 Table of Contents

GUIDE SPECIFICATIONS | Section 2.11
POLYDECK MR
®

Technical Data

Mechanical Room 48 Dry Mils (1219 microns)
Waterproof Coating
System

®
Primer Polyprime 2180SC
®
Polyprime EBF-LV
Basecoat PC-220SC

™
Topcoat Poly-I-Gard 246SC
™
Poly-I-Gard 295

Packaging

®
Polyprime 2180SC 2-gallon kit: One 1 gallon
Plywood/Concrete Substrate (properly prepared substrate) (3.78 liters) can of Side-A
or and One 1 gallon (3.78 liters)
Features can of Side-B
or
®
Polyprime EBF-LV
• Seamless 10-gallon kit: One 5 gallon
• Elastomeric (18.9 liters) pail of Side-A
and One 5 gallon (18.9 liters)
• Waterproof pail of Side-B
• Recoatable
PC-220SC 1 gallon (3.78 liters) cans or
Primers, base and topcoats have a shelf life of 1 year from date 5 gallon (18.9 liters) pail
of manufacture in original, factory-sealed containers when stored
indoors at a temperature between 60-95˚F (15-35˚C). Poly-I-Gard 246SC 5 gallon (18.9 liters) pail or
™
55 gallon drum, net fill 50
gallons (189 liters). Includes
catalyst.
Description
The Polydeck MR (Mechanical Room) system is a liquid Poly-I-Gard 295 4.4 gallon kit: One 5 gallon
®
™
applied, high solids, moisture cured waterproofing system. The (net 4 gallons, 15.12 liters)
system utilizes an epoxy primer, a high tensile polyurethane pail of Side-A and one 2
base coat and an aromatic, moisture cured polyurethane gallon (net 0.4 gallon, 1.1512
liters) jar of Side-B
topcoat to complete the system.
Polydeck MR is a user-friendly application that is specifically
®
designed to be tough and durable. It is an elastomeric system Product Instructions
designed to expand and contract with normal structural For complete information associated with the application of
movements. The three coat application saves time and labor. all Polycoat Products decking systems and products, refer
The system can be applied to protect surfaces against spalling, to the General Guidelines and Technical Data Sheets of the
freeze/thaw damage, and chemicals. It will neither soften Polycoat Products catalog, which describes the products,
in heat nor embrittle in the cold. Installed and maintained surface preparation, job conditions, finishing details and other
properly, the Polydeck MR (Mechanical Room) system will necessary information.
®
ensure years of service. Make sure to use the correct grade of
product which complies with VOC regulations/requirements Coatings Application
applicable as per federal, state, statutory, counties, cities and PHASE 1:
local bodies at the place of installation. Check area of application to ensure that it conforms to the
substrate requirements, as stated in the General Guidelines.

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 2.11
wpsales@polycoatusa.com | www.polycoatusa.com