Page 208 - Polycoat 1.1 Table of Contents

TECHNICAL DATA SHEET | Section 11.6
POLYGLAZE AR/POLY-I-GARD 246 CATALYST
®
™
Liquid Catalyst

Product Description
Polyglaze® AR/Poly-I-Gard 246 Catalyst is a single component, Technical Data (Based on Draw Down Film)
™
proprietary, liquid organometallic catalyst that reduces the
cold weather cure time of Polyglaze® AR or Poly-I-Gard 246. Specific Gravity 1.008 + 0.05
™
PC-550 Catalyst is added to PC-550SC. Polycoat Products
manufactures products in different VOC’s ranging from 100 Total Solids by Weight, ASTM 100%
to 340 gms/liter to comply with VOC requirements in various D2369
regions.
Total Solids by Volume, ASTM D2697 100%
Features
• Speeds cure time Viscosity at 75°F (24°C) 100 ± 50 cps
• Allows coatings to be applied in cold weather to 40-
50°F (4.44-10°C)
Volatile Organic Compounds, 0 lb/gal
Packaging ASTM D2369-81 0 gm/liter

0.7 ounce (20 gram) vial

1 quart (0.95 liter) can

Color
Clear
Mixing
Mix Polyglaze® AR/Poly-I-Gard 246 Catalyst using a
™
mechanical mixer such as a Jiffy Mixer, until a homogenous
mixture and color is attained or for at least 5 minutes, if mixed
by hand.
Cleanup
Equipment should be cleaned with an environmentally safe
solvent, as permitted under local regulations, immediately
after use.
Storage
Polyglaze® AR/Poly-I-Gard 246 Catalyst has a shelf life of
™
1 year from date of manufacture in original, factory-sealed
containers when stored indoors at a temperature between
60-95°F (15-35°C).
Limitations
For use in cold temperatures only. Excessive Polyglaze® AR/
Poly-I-Gard 246 Catalyst will result in a reduction of the
™
physical properties of the base membrane. Adding excessive
amounts of Polyglaze® AR/Poly-I-Gard 246 Catalyst may result
™
in foaming. Containers that have been opened must be used
as soon as possible. Do not dilute under any circumstance.
Warning
This product contains Curatives.

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 11.6
wpsales@polycoatusa.com | www.polycoatusa.com