Page 5 - tmp

TECHNICAL DATA SHEET
THEMECOAT 756-FR
®
Two Component Modified
Polyurea Protective Coating

PRODUCT DESCRIPTION
Themecoat 756-FR is a two component, 1:1 mix, fast cure 100% TECHNICAL DATA (Based on Draw Down Films)
®
solids modified aromatic polyurea/polyurethane elastomeric Mix Ratio 1A : 1B
system. It is designed, as a spray in mold elastomer for
producing various flexible texture skins, as a spray in the Pot Life 2-5 seconds
mold or post finishing for protecting flexible foam systems and Tack Free Time 10-30 seconds
as a tough protective membrane for water- proofing various
surfaces. The product must be applied with heated plural Recoat Time 0-12 hours
component spray equipment. Viscosity at 150-160ºF
(66.6-71ºC), Brookfield:
Side-A 250 ± 50 cps
FEATURES Side-B 400 ± 20 cps
• Abrasion and Impact Resistant Density (Side A & B 10.02 lbs/gal
• Chemical Resistant Combined) (1220 kgs/m )
3
• High Build Flash Point >200ºF
• Low Temperature Flexibility (>93.3ºC)
• Quick Drying Hardness, ASTM D-2240* 48 ± 5 D
• Seamless
• Tough and Elastomeric Tensile, ASTM 412-C* 1200 ± 200 psi
(8.3 ± 1.4 MPa)
Elongation, ASTM 412-C* 100% ± 20%
TYPICAL USES
• Architectural Shapes Tear, ASTM 624-C* 400 ± 30 pli
• Decorations (70 ± 8.7 kM/n)
• Encapsulation of Fiberglass Bodies and Polystyrene Service Temperature - Dry -20ºF to 250ºF
Foams (-29ºC to 121ºC)
• Tree Bark (*These physical properties from sample sprayed with Graco Foam Cat 200
@ 2000 psi (32 MPa) minimum, with Gusmer GX7-400 mechanical purge
PACKAGING gun @ 150-160°F (66-72ºC). Different machine and parameter will change
100-gallon kit: 50 gallon (189 liters) drum of Side-A and these properties. User should perform their own independent testing as
properties are approximate).
50-gallon (189 liters) drum of Side-B.
77°C). The Themecoat 756-FR material should be preheated
®
to 75-80°F (24-27°C).
COLORS
Neutral or Black. Custom colors are available upon request.
Additional charges may apply. STORAGE
Themecoat 756-FR has a shelf life of six (6) months from date
®
of manufacture in original, factory sealed containers.
COVERAGE Side-A and Side-B drums must be stored above 60°F (15°C).
Themecoat 756-FR should be applied in thin passes to achieve
®
desired thickness. Theoretical coverage for 1 mil thickness is Avoid freezing temperatures.
one gallon per 1600 sqft (3.78 liters per 149 sqm). Store drums on wooden pallets to avoid direct contact with
the ground.
SURFACE PREPARATION If stored for a long period of time, rotate Side-A and Side-B
Remove all contaminant, oil and grease from substrate. drums regularly.
DO NOT STORE OUTSIDE.
APPLICATION
Themecoat 756-FR should be applied using a 1:1 plural LIMITATIONS
®
component equipment capable of developing a minimum of Do not open until ready to use.
2000 psi (13.8 MPa) and heating the individual component to
170°F (77°C) using an impigment gun. Both Side-A and Side-B containers must be fitted with a
desiccant device during use.
Both Themecoat 756-FR Side-A and Side-B materials should
®
be continuously agitated before and during application.
Agitate at least 1 hour prior to application using heavy duty WARNING
drum agitator. This product contains Isocyanate and Curative Material.
Hose temperature should be maintained at 160-170°F (72-

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363
info@polycoatusa.com | www.polycoatusa.com