Page 74 - Catalogs
P. 74
GUIDE SPECIFICATIONS | Section 3.5
POLY-I-GARD 435/435SC
™
Technical Data
43 Dry Mil (1092 microns)
Vehicular Traffic Deck Coating System
Primer Polyprime 2180SC
®
®
Polyprime EBF-LV
Base Coat PC-235/235SC
Topcoat Poly-I-Gard 246/246SC
™
®
Polyglaze 100/100C/100SC
Polyglaze AL-50/50SC
®
Packaging
Concrete Substrate (properly prepared substrate)
Polyprime EBF-LV 2-gallon kit: One 1 gallon
®
or (3.78 liters) can of Side-A
Features Typical Usage and One 1 gallon (3.78 liters)
Polyprime 2180SC
®
• Chemical Resistance • Balconies can of Side-B or
• Elastomeric • Concrete Roof and Decks 10-gallon kit: One 5 gallon
(18.9 liters) pail of Side-A
• Recoatable Over Occupied Spaces and One 5 gallon (18.9 liters)
• Seamless • Helicopter Pads pail of Side-B
• UV Stable • Vehicular Decks
• Waterproof • Walkways/Stairs PC-235/235SC 5 gallon (18.9 liters) pail, or
55 gallon drum, net fill 50
gallons (189 liters)
Primers, base and topcoats have a shelf life of 1 year from date Polyglaze 100/100C/100SC 1 gallon (3.78 liters) can, 5
®
of manufacture in original, factory-sealed containers when stored ® gallon (18.9 liters) pail, or
indoors at a temperature between 60-95˚F (15-35˚C). or Polyglaze AL-50/50SC
55 gallon drum, net fill 50
Description gallons (189 liters)
The Poly-I-Gard 435/435SC Vehicular Traffic Deck System is
™
™
a liquid applied, high solids, moisture-cured waterproofing Poly-I-Gard 246/246SC 5 gallon (18.9 liters) pail or
system. It is a user-friendly application that is specifically 55 gallon drum net 50
gallons (189 liters), includes
designed to be tough and durable enough to withstand catalyst
vehicular traffic. It is an elastomeric system designed to
expand and contract with normal structural movements. Product Instructions
This system saves time and labor. It can be applied to For complete information associated with the application of
protect surfaces against spalling, freeze/thaw damage, all Polycoat Products decking systems and products, refer
and chemicals commonly encountered on vehicular traffic to the General Guidelines and Technical Data Sheets of the
decks. It will neither soften in heat nor embrittle in the cold. Polycoat Products catalog, which describes the products,
™
Installed and maintained properly, the Poly-I-Gard 435/435SC surface preparation, job conditions, finishing details and other
Vehicular Traffic Deck System will ensure years of service. necessary information.
Recommended system coverage mil thickness: vehicular traffic
systems, 43 ± 5 dry mils (1092 ± 125 dry microns). Make sure Coatings Application
to use the correct grade of product which complies with VOC PHASE 1:
regulations/requirements applicable as per federal, state, Check area of application to ensure that it conforms to the
statutory, counties, cities and local bodies at the place of substrate requirements as stated in the General Guidelines.
installation. Prime all joints, cracks, flashings with approved primers as
POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 3.5
wpsales@polycoatusa.com | www.polycoatusa.com