Page 67 - Polycoat 1.1 Table of Contents

GUIDE SPECIFICATIONS | Section 3.3
POLY-I-GARD 295/295OF
™

Technical Data

61 Dry Mils (1549 microns)
Vehicular Traffic Deck Coating System

Primer Polyprime EBF-LV
®
Polyprime 2180SC
®
Intermediate Coat Poly-I-Gard 295/295OF
™
Topcoat Poly-I-Gard 295/295OF
™

Packaging
Concrete Substrate (properly prepared substrate)
Polyprime EBF-LV 2-gallon kit: One 1 gallon
®
or (3.78 liters) can of Side-A
Features Typical Usage Polyprime 2180SC and One 1 gallon (3.78 liters)
®
can of Side-B or
• Chemical Resistance • Balconies 10-gallon kit: One 5 gallon
• Elastomeric • Concrete Roof and Decks (18.9 liters) pail of Side-A
• Recoatable Over Occupied Spaces and One 5 gallon (18.9 liters)
• Seamless • Helicopter Pads pail of Side-B
• UV Stable • Vehicular Decks
™
• Waterproof • Walkways/Stairs Poly-I-Gard 295/295OF 4.4 gal kits: One 5 gallon
pail, net 4 gallons (15.12
liters) of Side-A & one 1/2
gallon jar, net 0.4 gallons
(1.512 liters) of Side-B
Primers, base and topcoats have a shelf life of 1 year from date
of manufacture in original, factory-sealed containers when stored
indoors at a temperature between 60-95˚F (15-35˚C).

Description complies with VOC regulations/requirements applicable as
Poly-I-Gard 295/295OF Vehicular Traffic Deck System is an per federal, state, statutory, counties, cities and local bodies
™
odor friendly, two-component, rapid setting, liquid applied, at the place of installation.
high solids, chemically-cured waterproofing system. The Product Instructions
system utilizes an epoxy primer and one easy to use high For complete information associated with the application of
tensile, solvent free, hybrid aliphatic polyurea to complete all Polycoat Products decking systems and products, refer
the system. The system is a user-friendly application of a to the General Guidelines and Technical Data Sheets of the
low odor coating that is specifically designed to be tough Polycoat Products catalog, which describes the products,
and durable enough to withstand vehicular traffic. It is an surface preparation, job conditions, finishing details and other
elastomeric system designed to expand and contract with necessary information.
normal structural movements. The three coat application saves
time and labor. It can be applied up to 1.5 gal/100sqft or 66 Coatings Application
sqft/gallon to protect surfaces against spalling, freeze/thaw PHASE 1:
damage, and chemicals commonly encountered on vehicular Check area of application to ensure that it conforms to the
traffic decks. It will neither soften in heat nor embrittle in substrate requirements as stated in the General Guidelines.
the cold. Installed and maintained properly, the Poly-I-Gard Prime all joints, cracks, flashings with approved primers as
™
295/295OF Vehicular Traffic Deck System will ensure years of specified below in Phase 2. Apply PC-260 over all joints, cracks,
service. Make sure to use the correct grade of product which and flashing. Bridge joints, cracks, and flashings with 4” (10.2

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 3.3
wpsales@polycoatusa.com | www.polycoatusa.com