Page 47 - tmp

TECHNICAL DATA SHEET I SECTION 3.6
POLYEURO 5502-F
®
Two Component Aromatic Polyurea Protective Coating

Product Description Technical Data
Polyeuro 5502-F is a fast setting, rapid curing, 100% solids,
®
flexible, aromatic, two component spray polyurea that can be Mix Ratio by Volume 1A : 1B
applied to suitably prepared concrete and metal surfaces. It Pot Life @ 150ºF (65.5ºC), 50% R.H. 4 - 8 seconds
has extremely fast gel time making it suitable for applications
down to -20°F (-28.89°C). It may be applied in single or multiple Tack Free Time (thickness & substrate 10 - 15 seconds
applications without appreciable sagging and is relatively temperature dependent)
insensitive to moisture and temperature allowing application Recoat Time 0 - 6 hours
in most temperatures. Polyeuro 5502-F offers a tack free time Viscosity at 150-160°F (65.5-71°C)
®
of less than sixty seconds and exhibits 375% ± 50% elongation Side-A 100 ± 20 cps
upon curing with 50 Shore D hardness. Side-B 50 ± 20 cps
Features Density (Side A & B Combined) 8.75 lbs/gal
• Coats Carbon or Mild Steel Metals Without Primer on Flash Point > 200°F (93.3°C)
Properly Prepared Surfaces Hardness, ASTM D-2240 50 ± 5 Shore D
• Elastomeric Tensile Strength, ASTM D412* 3000 ± 200 psi
• Excellent Thermal Stability 20.68 ± 1.37 MPa
• Good Chemical Resistance Elongation, ASTM D412* 375 ± 50%
• Installed With or Without Reinforcement in Transitional Tear Stength, ASTM D624* 450 ± 50 pli
AreasLow Temperature Flexibility 78.8 ± 8.8 kNm
• Meets USDA Criteria Service Temperature - Dry -40°F to 250°F
• Odorless -40°C to 121°C
• Seamless Service Temperature - Wet 40°F to 120°F
• Zero VOC (100% Solids) 4.44°C to 48.89°C
(*These physical properties from sample sprayed with Graco EXP2 @ 2000 psi minimum, with
Fusion Gun AP4242 @ 150-160°F (65°C to 71°C) blistering. Color change, gloss reduction &
chalking are noted. Different machine and parameter will change these properties. User should
Typical Uses perform their own independent testing as properties are approximate).
• Cold Storage Facilities
• Fertilizer Plants Colors
Clear/Neutral. Custom colors are available upon request.
• Food Processing Plants Color Packs, when used, must be added to Side-B.
• Industrial and Manufacturing FacilitiesLandfill Due to its aromatic composition, Polyeuro 5502-F will tend to
®
Containment yellow or darken in color and will become flat after exposure
• Marine Environments to UV light. A topcoat can be applied to Polyeuro 5502-F
®
• Mining Operations within six hours of application with an aliphatic polyurethane/
• Paper and Pulp Mills polyurea coating for a colorfast finish.
• Parking Garage Decks Coverage
• Power Plants Polyeuro 5502-F may be applied at any rate to achieve desired
®
• Refineries thickness. Theoretical coverage for 1 mil (0.254 microns)
• Secondary Containment thickness is one gallon per 1600 sqft (3.78 liters per 149 sqm).
• Structural Steel Estimating Formula: (1600 sqft per gal /Dry Mil Thickness) x
• Walkways and Balconies Solids Content = Application Rate per gallon.
• Warehouse Floors Surface Preparation
• Water and Wastewater Treatment Plants In general, coating performance and adhesion are directly
proportional to surface preparation. Most failures in the
performance of surface coatings can be attributed to poor
surface preparation. Polyurea coatings rely on the structural
Packaging strength of the substrate to which they are applied. All surfaces
must be free of dust, dirt, oil, grease, rust, corrosion and other
contaminants. When coating previously used substrates, it is
10-gallon kit 5 gallons (18.9 liters) Side-A important to consider the possibility of substrate absorption,
(Isocyanate side) and 5 gallons (18.9 which may affect the adhesion of the coating system,
liters) Side-B (Resin side) regardless of the surface preparation. Polycoat recognizes
the potential for unique substrates from one project to another.
100-gallon kit 50 gallons (189 liters) Side-A The following information is for general reference. For project-
(Isocyanate side) and 50 gallons (189 specific questions, contact Polycoat.
liters) Side-B (Resin side)

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 3.6
info@polycoatusa.com | www.polycoatusa.com