Page 69 - Polycoat 10.2 Technical Data Sheet Polycaulk 82

TECHNICAL DATA SHEET
POLYEURO 5602
®
Two Component Aromatic Polyurea Protective Coating

Product Description
Polyeuro 5602 is a fast setting, rapid curing, 100% solids, Technical Data (Based on Draw Down Film)
®
flexible, aromatic, two component, spray polyurea that can Mix Ratio by Volume 1A : 1B
be applied to suitably prepared concrete and metal surfaces. Pot Life @ 150ºF (65.5ºC), 50% R.H. 2-4 seconds
Its extremely fast gel time makes it suitable for applications
down to -20°F (29°C). It may be applied in single or multiple Tack Free Time (thickness & substrate 15-30 seconds
applications without appreciable sagging and is relatively temperature dependent)
insensitive to moisture and temperature allowing application Recoat Time 0 - 6 hours
in most temperatures. Polyeuro 5602 offers a tack free time Viscosity at 150-160°F (65.5-71°C)
®
of less than thirty seconds and exhibits 275% elongation upon Side-A 100 ± 20 cps
curing with 60 Shore D hardness. Side-B 60 ± 20 cps
Features Density (Side-A & Side-B Combined) 8.84 lbs/gal
• Coats Carbon or Mild Steel Metals without Primer on Flash Point > 200°F (93.3°C)
Properly Prepared Surfaces Hardness, ASTM D2240 60 ± 5 Shore D
• Excellent Thermal Stability Tensile Strength, ASTM D412* 3000 ± 200 psi
• Good Chemical Resistance 20.68 ± 1.37 MPa
• Installed With or Without Reinforcement in Transitional Elongation, ASTM D412* 275 ± 50%
Areas Tear Resistance, ASTM D412* 450 ± 50 pli
• Low-Permeance Rate 78.8 ± 8.8 kNm
• Low-Temperature Flexibility Service Temperature - Dry -40°F to 250°F
• Meets USDA Criteria -40°C to 121°C
• Non-Reactive Service Temperature - Wet 40°F to 120°F
• No Toxic Vapors 4.44°C to 48.89°C
• Odorless Water Vapor Transmission ASTM E96 0.48 Perm
• Seamless *These physical properties from sample sprayed with Graco EXP2 @ 2000 psi minimum, with
• Zero VOC (100% Solids) Fusion Gun AP4242 @ 150-160°F (65°C to 71°C) blistering. Color change, gloss reduction &
chalking are noted. Different machine and parameter will change these properties. User should
perform their own independent testing as properties are approximate.
Typical Uses
• Cold-Storage Facilities
• Dump Trucks Colors
Clear/Neutral or Black. Custom colors are available upon
• Fertilizer Plants request. Color Packs, when used, must be added to Side-B.
• Food-Processing Plants
• Industrial and Manufacturing Facilities Due to its aromatic composition, Polyeuro 5602 will tend to
yellow or darken in color and will become flat after exposure
• Marine Environments to UV light. Polyeuro 5602 may be topcoated within twelve
• Mining Operations hours of application with an aliphatic polyurethane/polyurea
• Paper and Pulp Mills coating for a colorfast finish.
• Power Plants Coverage
• Refineries Polyeuro 5602 may be applied at any rate to achieve desired
• Secondary Containment thickness. Theoretical coverage for 1 mil (0.254 microns)
• Structural Steel thickness is one gallon per 1600 sqft (3.78 liters per 149 sqm).
• Walkways and Balconies Estimating Formula: (1600 sqft per gal /Dry Mil Thickness) x
• Warehouse Floors Solids Content = Application Rate per gallon.
• Water and Wastewater Treatment Plants Surface Preparation
In general, coating performance and adhesion are directly
proportional to surface preparation. Most failures in the
performance of surface coatings can be attributed to poor
Packaging surface preparation. Polyurea coatings rely on the structural
strength of the substrate to which they are applied. All surfaces
10-gallon kit 5 gallons (18.9 liters) of Side-A and 5 must be free of dust, dirt, oil, grease, rust, corrosion and other
gallons (18.9 liters) of Side-B contaminants. When coating previously used substrates, it is
important to consider the possibility of substrate absorption,
which may affect the adhesion of the coating system,
100-gallon kit 50 gallons (189 liters) of Side-A and regardless of the surface preparation. Polycoat recognizes
50 gallons (189 liters) of Side-B
the potential for unique substrates from one project to another.

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363
wpsales@polycoatusa.com | www.polycoatusa.com