Page 35 - Polycoat 10.2 Technical Data Sheet Polycaulk 82

TECHNICAL DATA SHEET | Section 7.14
POLYCOAT STAINGARD™ 9072SC
Aliphatic, Polyaspartic,
Polyurea Waterproofing Membrane Topcoat

Product Description
Polycoat Staingard™ 9072SC is an aliphatic polyaspartic, Technical Data (Based on Draw Down Film)
environmentally friendly, highly chemical resistant surface
topcoat for waterproofing membrane systems. Polycoat Mix Ratio by Volume 1A : 1B
Staingard™ 9072SC is quick curing and specifically formulated
to be installed in thin film applications. Polycoat Products
manufactures products in different VOC’s ranging from 100 Coverage Rate 1 gal/100 sqft
to 340 gms/liter to comply with VOC requirements in various (0.41 l/sqm)
regions. Make sure to use the right grade of product which
complies with VOC regulations/requirements applicable as Dry Film Thickness per Coat 14 ± 2 mils
per federal, state, statutory, counties, cities and local bodies 356 ± 50 microns
at the place of installation.
Pot Life @ 75ºF (24ºC), 50% R.H. 45-60 minutes
Features
• Abrasion Resistant Hardness, ASTM D2240 70 ± 5 Shore D
• Excellent Weatherability
Tear Resistance, 400 ± 30 pli
• High Gloss ASTM D624 70.1 ± 8.8 kN/m
• High Tensile Strength
• Quick Cure Tensile Strength, 3500 ± 300 psi
ASTM D412 24.1 ± 2.1 MPa
• Seamless Waterproofing Membrane
• Skydrol Resistance Ultimate Elongation, 50 ± 10%
ASTM D412
• Superior Chemical Resistance
• Topcoat Over Aromatic Polyurea, Polyurethane & Epoxy Specific Gravity,
Applications Side A 1.07 ± 0.1
Side B
1.02 ± 0.1
• UV Resistant For Superior Gloss Retention
• Very Durable Total Solids by Weight, 90 ± 2%
ASTM D2669
Typical Uses
Total Solids by Volume, 88 ± 2%
• Concrete • Off-Shore Oil Platforms ASTM D2697
• Chemical Plants • Pipeline Barges
Viscosity at 75°F (24°C),
• Cold Storage Areas • Plastic Side A 200 ± 50 cps
Side B
• Fertilizer Plants • Plywood 200 ± 50 cps
• Food Processing Areas • Pulp and Paper Mills
Volatile Organic Compounds, 0.83 lb/gal
• Industrial Warehouses • Steel ASTM D2369-81 100 gm/liters

Packaging
2-gallon kit One 1 gallon (3.78 liters) can Side-A
and One 1 gallon (3.78 liters) can Color
Side-B Clear
Coverage
10-gallon kit One 5 gallon (18.9 liter) pail of Side-A The approximate coverage is 1 gallon/100 sqft (0.41 l/sqm).
and One 5 gallon (18.9 liter) pail of Coverage rate will depend on surface roughness and porosity.
Side-B
10-gallon kit is not a stock item and is
available with minimum order of 100
gallons (378 liters)

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 7.14
wpsales@polycoatusa.com | www.polycoatusa.com