Page 263 - Catalogs

ESR-2785 Page 3 of 11

®
caulking material to fill cracks and joints in the substrate. It is available as P-Tuff SLV Solvenated Base
Membrane or, solvent-free, as P-Tuff Classic or P-Tuff Flex. P-Tuff Base Membrane is mixed with water at
®
®
®
®
a mixing ratio of 2.5 gallons (9.5 L) of P-Tuff Base Membrane material to 2.5 quarts (2.4 L) of water, to yield
a material called P-Tuff Mixed Membrane Material (P-Tuff MMM). The P-Tuff products are available in 5-
®
®
®
gallon (18.9 L) containers.
3.1.2.5 ENDURIT DECK Pro-55 BC: ENDURIT DECK Pro-55 BC is a single-component, water-catalyzed,
polyurethane elastomeric mixture that is applied, without dilution, as the base membrane. This membrane
material is also used as a caulking material to fill cracks and joints in the substrate. It is available, solvent-free,
as ENDURIT DECK Pro-55 BC Classic. ENDURIT DECK Pro-55 BC Base Membrane is mixed with water at
a mixing ratio of 2.5 gallons (9.5 L) of ENDURIT DECK Pro-55 BC Base Membrane material to 2.5 quarts (2.4
L) of water, to yield a material called ENDURIT DECK Pro-55 BC Mixed Membrane Material (ENDURIT DECK
Pro-55 BC MMM). The ENDURIT DECK Pro-55 BC products are available in 5-gallon (18.9 L) containers.
3.1.3 Surface-protection Coatings:
3.1.3.1 PolyGlaze 400 FR: This is a two-part, moisture-cured, aliphatic polyester polyurethane coating. It is
available in 6-gallon (22.7 L) kits. The powder-to-liquid mixing ratio is 1-to-5 by volume.
3.1.3.2 PolyGlaze 400: This is a single-component, moisture-cured, aliphatic polyester polyurethane
coating. It is available in 1- and 5-gallon (3.8 and 18.9 L) pails.

3.1.3.3 Polycoat-Staingard 1110: This is a two-component, liquid-applied, aliphatic polyester polyurethane
coating. It is available in 1- and 5-gallon (3.8 and 18.9 L) kits.
3.1.3.4 Poly-I-Gard 246: This is a single-component, moisture-cured, urethane basecoat and surface-
®
protection coating. It is available in 5-gallon (18.9 L) pails and 55-gallon (208.2 L) drums. The Poly-I-Gard
®
246 is used with an accelerator as described in Section 3.1.4.3.
®
3.1.3.5 Poly-I-Gard 246 SF: This is a single-component, moisture-cured, solvent-free, urethane basecoat
and surface protection coating. It is available in 5-gallon (18.9 L) pails and 55-gallon (208.2 L) drums. The
Poly-I-Gard 246 SF is used with an accelerator as described in Section 3.1.4.3.
®
®
3.1.3.6 Topshield EST: This is a single-component, moisture-cured, aliphatic polyester polyurethane
coating. It is available in 1- and 5-gallon (3.8 and 18.9 L) pails.
3.1.3.7 Topshield EST-FR: This is a two-part, moisture-cured, aliphatic polyester polyurethane coating. It
®
is available in 6-gallon (22.7 L) kits. The powder-to-liquid mixing ratio is 1-to-5 by volume.
3.1.3.8 ENDURIT DECK Pro-55 ALT: This is a single-component, moisture-cured, aliphatic polyester
polyurethane coating. It is available in 1- and 5-gallon (3.8 and 18.9 L) pails.
3.1.3.9 ENDURIT DECK Pro-55 ALT FR: This is a two-part, moisture-cured, aliphatic polyester
polyurethane coating. It is available in 6-gallon (22.7 L) kits. The powder-to-liquid mixing ratio is 1-to-5 by
volume.
3.1.4 Accelerators, Hardeners, and Catalysts:
3.1.4.1 PolyCoat PC-50 Thickener/Accelerator: This is a proprietary liquid catalyst used to accelerate and
thicken the PolyCoat PC-440 and PolyCoat PC-440 SF elastomeric waterproofing membranes. Thickened
PolyCoat PC-440 and PolyCoat PC-440 SF membranes may be used as caulking pastes to fill cracks.
PolyCoat PC-50 is available in 1-quart (0.95 L) and 1-gallon (3.8 L) containers. The mixing ratio is 1 quart (0.95
L) of PolyCoat PC-50 to 5 gallons (18.9 L) of base membrane.
3.1.4.2 PolyCoat PolyGlaze Hardener: This is a liquid accelerator used in the PolyGlaze 400 FR,
®
®
PolyGlaze 400, Poly-I-Gard 246, and Poly-I-Gard 246 SF surface-protection coatings. It is available in 1-
quart (0.95 L) and 1-gallon (3.6 L) containers. Maximum mixing ratio is 1 quart (0.95 L) of hardener to 5 gallons
(18.9 L) of surface-protection coatings.
3.1.4.3 Poly-I-Gard 246 Accelerator: This accelerator must be added at a rate of 8 ounces (0.24 L) per 5
®
gallons (18.9 L) of Poly-I-Gard 246 or Poly-I-Gard 246 SF.
®
®
®
3.1.4.4 Quick-N-Cure Catalyst: This is a proprietary, organometallic catalyst used in the PolyKarpet SL-
660 base membrane. The mixing ratio is one to three vials (20 to 60 grams) of Quick-N-Cure to 5 gallons (18.9
L) of PolyKarpet SL-660 base membrane.
®
®
®
®
3.1.4.5 Topshield Accelerator: This is a liquid accelerator used in the Topshield EST and Topshield
EST-FR surface-protection coatings. The maximum mixing ratio is 1 quart (0.95 L) of the accelerator to 5