Page 126 - Catalogs

TECHNICAL DATA SHEET | Section 6.6
PC-260 VERTICAL
Two Component,
Solvent Free, Elastomeric Base Membrane

Product Description
PC-260 Vertical is a two component, fast setting, fast curing, Technical Data (Provisional, Based on Draw Down Film)
solvent free, flexible, high performance, and high solids
polyurea hybrid elastomeric coating that can be applied Coverage Rate 1 gal/100 sqft
vertically to suitably prepared interior or exterior concrete, 0.41 l/sqm
plywood and metal surfaces. Due to its fast gel time, PC-
260 Vertical is suitable for applications in temperatures as
low as 20°F (-6°C). It may be applied in a single or multiple Dry Film Thickness per Coat 15 ± 1 mils
applications. PC-260 is also relatively insensitive to moisture 381 ± 25 microns
and temperature allowing applications in varied temperatures
and humidity.
Mixing Ratio 4A : 1B
Features
Hardness, ASTM D2240 70 ± 2 Shore A
• Can Be Applied At Any Thickness
• Excellent Low Temperature Flexibility
175 ± 25 pli
• Good Chemical Resistance Tear Resistance, Die C, ASTM 30.6 ± 4.4 kN/m
D624
• Good Thermal Stability
• Non-Gassing
35 ± 5 pli
• Recoatable Split Tear, ASTM D470 6.1 ± 0.9kN/m
• Seamless
Typical Uses Tensile Strength, ASTM D412 1000 ± 100 psi
6.9 ± 0.7 MPa
• Crack Repairs
• Expansion Joints Ultimate Elongation, ASTM 350 ± 50%
• Exterior & Interior Retaining Walls such as Exposed D412
Membranes
• Interior Surfaces such as Floors and Mechanical Rooms Specific Gravity,
• Sundecks & Balconies Side-A 1.18 ± 0.1
• Vehicular Traffic Areas Side-B 0.98 ± 0.1
• Sandwiched Membrane in Concrete Walls for
Waterproofing Total Solids by Weight, ASTM 94 ± 2%
• Coating with Geotextile Fabric or Glass Fiber for Primary/ D2369
Secondary Containment or Waterproofing Membrane
Total Solids by Volume, ASTM 95 ± 2%
Packaging D2697

1-Gallon Kit One 1 gallon can, net fill 0.8 Viscosity at 75°F (24°C)
gallons (3 liters) of Side-A Thixotropy Paste
and One quart can, net fill Side-A 100 ± 50 cps
0.2 gallons (0.78 liters) of Side-B
Side-B
Volatile Organic Compounds,
5-Gallon Kit One 5 gallon pail, net fill ASTM D2369-81 <0.04 lb/gal
4 gallons (15.12 liters) of <5 gm/liters
Side-A and One 1 gallon
(3.78 liters) can of Side-B

Mixing
Color NOTE: PC-260 Vertical may not be diluted under any
Standard Grey. See color chart for special provisions. Contact circumstances. Proportions are pre-measured.
Polycoat Products for more information. Using a mechanical mixer, first pre-mix separately Side-A and
Surface Preparation Side-B base material thoroughly to attain a uniform color,
Refer to General Guidelines for complete information. making sure to scrape the solids from the bottom and sides
of the pail.

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 6.6
wpsales@polycoatusa.com | www.polycoatusa.com