Page 49 - tmp

GUIDE SPECIFICATIONS | Section 3.2
POLY-I-GARD 246SC
™

Technical Data

40 Dry Mils
Vehicular Traffic Deck Coating System

Primer Polyprime EBF-LV
®

Intermediate Coat Poly-I-Gard 246SC
™
Topcoat Poly-I-Gard 246SC
™

Packaging

Polyprime EBF-LV 2-gallon kit: One 1 gallon
®
Concrete Substrate (properly prepared substrate) (3.78 liters) can of Side-A
and One 1 gallon (3.78 liters)
can of Side-B or
Features Typical Usage 10-gallon kit: One 5 gallon
(18.9 liters) pail of Side-A
• Chemical Resistance • Vehicular Decks and One 5 gallon (18.9 liters)
• Elastomeric • Walkways/Stairs pail of Side-B
• Recoatable • Balconies
• Seamless • Helicopter Pads Poly-I-Gard 246SC 5 gallon pail (18.9 liters) with
™
• Waterproof • Concrete Roof and Decks 1/2 pint (0.245 liters) can of
Over Occupied Spaces catalyst or
55 gallon drum net 50
gallons (189 liters) with two
Primers, base and topcoats have a shelf life of 1 year from date 1/2 quart cans of catalyst
of manufacture in original, factory-sealed containers when stored (0.472 liters)
indoors at a temperature between 60-95˚F (15-35˚C).
Approvals, Codes & Testing
Description • Will comply with Class A Fire Rating on Concrete, UBC
The Poly-I-Gard 246SC Vehicular Traffic Deck System is a Standard 32-7, ASTM E108, UL 790, NFPA 256
™
liquid applied, high solids, moisture-cured waterproofing • Meets the Criteria of ASTM C1028 Co-efficient of Friction
system. It utilizes an epoxy primer and one easy-to-use high
tensile, aromatic polyurethane to complete the system. Product Instructions
The system is a user-friendly application that is specifically For complete information associated with the application of
designed to be tough and durable enough to withstand all Polycoat Products decking systems and products, refer
vehicular traffic. It is an elastomeric system designed to to the General Guidelines and Technical Data Sheets of the
expand and contract with normal structural movements. The Polycoat Products catalog, which describes the products,
three coat application saves time and labor. It can be applied surface preparation, job conditions, finishing details and other
to protect surfaces against spalling, freeze/thaw damage, necessary information.
and chemicals commonly encountered on vehicular traffic
decks. It will neither soften in heat nor embrittle in the cold. Coatings Application
Make sure to use the correct grade of product which complies PHASE 1:
with VOC regulations/requirements applicable as per federal, Check area of application to ensure that it conforms to the
state, statutory, counties, cities and local bodies at the place substrate requirements, as stated in the General Guidelines.
of installation. Prime all joints, cracks, flashings with approved primers as

POLYCOAT PRODUCTS TEL 562.802.8834 | FAX 562.921.7363 Section 3.2
wpsales@polycoatusa.com | www.polycoatusa.com