Page 10 - Industrial Coatings

POLYCOAT POLYEURO® 5901
PRODUCTS
Two Component Aromatic
A Division of American Polymers Corp. Polyurea Protective Coating

DESCRIPTION TECHNICAL DATA
Polyeuro® 5901 is a fast set, rapid curing, 100% solids, Mix Ratio by Volume ................................................ 1A : 1B
flexible, aromatic, two component spray polyurea that can be Pot Life @ 150°F ...................................................... 3 - 5 secs
applied to suitably prepared concrete and metal surfaces. Its Tack Free Time ......................................................... 60 - 120 secs
extremely fast gel time makes it suitable for applications Recoat Time .............................................................. 0 - 6 hours
down to -20°F. It may be applied in single or multiple Viscosity at 150-160°F (66.5-71°C), Brookfield:
applications without appreciable sagging and is relatively Part-A ....................................................................... 50 ± 20 cps
insensitive to moisture and temperature allowing application Part-B ....................................................................... 50 ± 20 cps
in most temperatures. Density (Side A & B Combined) .............................. 8.75 lbs/gal
Flash Point ................................................................ > 200°F
FEATURES Hardness, ASTM D-2240* ....................................... 85 ± 5 A
Tensile, ASTM D-412* .............................................. 3000 ± 200 psi
Excellent Thermal Stability Zero VOC Elongation, ASTM D-412* ........................................ 650% ± 50%
Tear, ASTM D-412* .................................................. 450 ± 50 pli
No Toxic Vapors  Odorless Service Temperature ............................................... -40°F to 300°F
Water Vapor Permeability, ASTM E-96 ................... 0.00042 gm/hr . in2
Meets USDA Criteria 100% Solids VOC Content ............................................................ 0 gm/lit
Recommended Applied Thickness .......................... > 2 mm
 Seamless Low Permeance Rate Return to Service: Foot Traffic ............................... 1 - 4 hours
Return to Service: Full Service ............................... 10 - 24 hours
Low Temperature Flexibility Non-Reactive Taber Abrasion Resistance, ASTM D-4060
(CS17 wheel, 1000 cycles, 1 kg load) (maximum) ............ 28.1 mg loss
Good Chemical Resistance Water Absorption, ASTM D471
(max 23°C, 24 hrs) .................................................... < 0.5%
Excellent Color Retention Crack Bridging, ASTM C836
(-25°C, 1.6mm crack, 25 cycles) .............................. Pass
Coats Most Metals without Primer Impact Resistance @ 25°C ....................................... > 200 lbs
Pull-Off Strength (minimum), ASTM D-4541:
Installed With or Without Reinforcement in Transitional Inter-Coat Adhesion (within recoat time) .......................... Excellent
Concrete (Shot blast and primed profile), substrate
Areas failure occurred ......................................................... > 500 psi
Steel (75-100 micron blast profile) ......................................... > 900 psi
TYPICAL USES Lineal Shrinkage ........................................................ 1 - 2%
Flexibility 1/8”(3mm) Mandrel Bend Test, ASTM D1737 ..... Pass
Airports Power Plants Resistance to Weathering, ASTM G-23
(Type DH Weatherometer-2000 hrs exposure) .................... No cracking or
Refineries Structural Steel blistering. Color change, gloss reduction & chalking are noted.

Fertilizer Plants Warehouse Floors (*These physical properties from sample sprayed with Graco Foam Cat 200
@ 2000 psi minimum, with Gusmer GX7-400 mechanical purge gun @ 150-
Mining Operations Cold Storage Facilities 160°F. Different machine and parameter will change these properties. User
should perform their own independent testing as properties are approximate.)
Food Processing Plants Landfill Containment

Marine Environments Paper and Pulp Mills

Secondary Containment Parking Garage Decks

Walkways and Balconies

Water and Waste Water Treatment

Industrial and Manufacturing Facilities

COLORS
Clear/Neutral. Custom colors are available upon request.
Color Packs, when used, must be added to Part-B.

Due to its aromatic composition, Polyeuro® 5901 will tend
to yellow or darken in color and will become flat after expo-
sure to UV light. Polyeuro® 5901 may be topcoated within
twelve hours of application with an aliphatic polyurethane/
polyurea coating for a colorfast finish.

PACKAGING SURFACE PREPARATION
10 gallon kit: 5 gallons Part-A (Isocyanate side) and 5 gallons In general, coating performance and adhesion are directly
Part-B (Resin side). proportional to surface preparation. Most failures in the
performance of surface coatings can be attributed to poor
100 gallon kit: 50 gallons Part-A (Isocyanate side) and 50 surface preparation. Polyurea coatings rely on the structural
gallons Part-B (Resin side). strength of the substrate to which they are applied. All sur-
faces must be free of dust, dirt, oil, grease, rust, corrosion and
COVERAGE other contaminants. When coating substrates previously
Polyeuro® 5901 may be applied at any rate to achieve desired used, it is important to consider the possibility of substrate
thickness. Theoretical coverage for 1 mil thickness is one absorption, which may affect the adhesion of the coating system,
gallon per 1600 sq. ft. regardless of the surface preparation. Polycoat recognizes the

14722 Spring Avenue  Santa Fe Springs, CA 90670-5108 USA  Tel: 562/802-8834  Fax: 562/921-7363  www.polycoatusa.com  Copyright  September 2011 Polycoat Products  Page 1