Page 15 - tmp
P. 15

temperatures and/or high humidity will significantly accelerate
        the cure time and pot life. Use caution in batch sizes and
        thickness of application.  Low temperature and/or low humidity
        will extend the cure time.
        Cleanup
        Equipment should be cleaned with an environmentally safe
        solvent, as permitted under local regulations, immediately
        after use.
        Storage
        Metal Primer 130 has a shelf life of 1 year from date of
        manufacture in original, factory sealed containers. Side-A
        and  Side-B must be stored between 60-95°F (15-35°C). Avoid
        freezing temperatures. Store containers on wooden pallets to
        avoid direct contact with the ground.

        Limitations
        Not UV stable. Cannot withstand direct wear or abrasion.
        Containers that have been opened must be used as soon
        as possible. Metal Primer 130 is difficult to clean up after it
        has cured. Mix no more material than can be used within 20
        minutes.

        This product is NOT for sale in California or any location where
        a VOC of 360 gms/liters is not acceptable.

        Warning
        This product contains Isocyanates.
























        Limited Warranty: Please read all information in the General Guidelines, Technical Data Sheets, Guide Specifications and Safety Data Sheets (SDS) before applying material. These products are for professional use only
        and preferably applied by professionals who have prior experience with the Polycoat Products materials or have undergone training in application of Polycoat Products materials. Published technical data and instructions are
        subject to change without notice. Contact your local Polycoat Products representative or visit our website for current technical data, instructions, and project specific recommendations.
        Polycoat Products warrants its products to be free of manufacturing defects and that they will meet Polycoat Products’ current published physical properties. Seller’s and manufacturer’s sole responsibility shall be to
        replace that portion of the product which proves to be defective. There are no other warranties by Polycoat Products of any nature whatsoever expressed or implied, including any warranty of merchantability or fitness for
        a particular purpose in connection with this product. Polycoat Products shall not be liable for damages of any sort, including remote or consequential damages resulting from any claimed breach of any warranty whether
        expressed or implied. Polycoat Products shall not be responsible for use of this product in a manner to infringe on any patent held by others. In addition, no warranty or guarantee is being issued with respect to appearance,
        color, fading, chalking, staining, shrinkage, peeling, normal wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and/or physical movement
        of the substrate or structural defects are also excluded from the limited warranty. Polycoat Products reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs by owner,
        general contractor, or applicator.
        Disclaimer: All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and completeness of said tests are not
        guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user’s responsibility to satisfy himself, by his own information and test, to determine suitability of the product for his own intended use,
        application and job situation and user assumes all risk and liability resulting from his use of the product. We do not suggest or guarantee that any hazard listed herein are the only ones which may exist. Neither seller nor manufacturer
        shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements, whether in writing or oral, other than those
        contained herein shall not be binding upon the manufacturer, unless in writing and signed by a corporate officer of the manufacturer. Technical and application information is provided for the purpose of establishing a general profile
        of the material and proper application procedures. Test performance results were obtained in a controlled environment and Polycoat Products makes no claim that these tests or any other tests accurately represent all environments.
        Polycoat Products is not responsible for typographical errors. © 2023 Polycoat Products. All rights reserved. Revision 20230807.JC





        POLYCOAT PRODUCTS TEL 562.802.8834  |  FAX 562.921.7363                                        Section 2.1
        info@polycoatusa.com  |  www.polycoatusa.com
   10   11   12   13   14   15   16   17   18   19   20